How to Read a Roofing Estimate Line by Line

In short
A complete roofing estimate lists the company’s full contact details, the measured squares and waste factor, how many layers come off, the exact shingle line, underlayment, drip edge, starter, ridge cap, vents, flashing, a per-sheet decking price, permit, cleanup and a payment schedule. To compare quotes fairly, line them up item by item on the same squares and the same products before you look at the totals.
Key takeaways
- Compare estimates on the same number of squares and the same shingle line, or the totals mean nothing.
- A per-sheet decking price protects you from a surprise change order once the old roof is off.
- The Texas Department of Insurance advises written estimates on company letterhead, no blank spaces in contracts and no full payment up front.
- Texas law requires a bold deductible notice on contracts of $1,000 or more expected to be paid by insurance, and makes it a crime for the roofer to waive your deductible.
- Missing lines are as important as prices: drip edge, pipe boots, vents and permit are often what separates a low bid from a complete one.
You collected two or three roofing quotes, and they look like they describe three different houses. One is a single page with a total. One runs four pages of codes and abbreviations. The prices are thousands of dollars apart.
That is normal, and it is fixable. Once you know what each line means and which lines should be there, you can compare any two estimates on equal terms. This guide walks through a residential shingle estimate from top to bottom, with the Texas rules that apply when insurance is paying.
What should be at the top of a roofing estimate?
Before you read a single price, check who wrote it. The Texas Department of Insurance advises getting written estimates on company letterhead with clear contact information. At minimum, the top of the estimate should show:
- The company's legal name, a physical address and a phone number that someone answers
- The name of the person who inspected the roof
- Your property address and the date
- An estimate number or version, so revisions are easy to track
- How long the price is valid
A post office box and a cell number with no business name are reasons to slow down. After big North Texas storms, crews from other states sometimes set up for a few weeks and leave. Our guide to roofing contract red flags under Texas law covers that in more detail.
How do I check the roof size on the estimate?
The roof size is listed in squares, where one square is 100 square feet of roof surface. Owens Corning's measuring guide uses that definition and recommends a waste allowance of 10 to 15 percent for shingles, more on complicated roofs.
A good estimate shows:
- Measured squares (the true roof area)
- Waste percentage, or ordered squares (measured plus waste)
- Pitch of the main roof planes
- Number of stories, since height changes labor and safety equipment
If two estimates for the same house differ by more than a couple of squares, ask each roofer how they measured. Our guide on what a roofing square is and how to check yours shows how to verify the number from the ground.
What do the line items on a roofing estimate mean?
Here are the lines you should expect on a complete shingle replacement, what they are and what to look for:
| Line item | What it is | What to check |
|---|---|---|
| Tear-off and disposal | Removing old shingles to the deck and hauling them away | How many layers; Fixr puts tear-off near $50 per square, up to $150 for heavy or multiple layers |
| Decking | Plywood or OSB under the shingles | A per-sheet price for replacement, and how you will be notified |
| Underlayment | Water-resistant layer over the deck | Synthetic or felt, and which product |
| Drip edge | Metal along eaves and rakes | Included, new, and the color |
| Starter strip | First course at the eaves | A dedicated starter product, not cut shingles |
| Shingles | The field of the roof | Brand, exact product line and color |
| Hip and ridge cap | Shingles along the peaks | Matching cap product, measured in linear feet |
| Ventilation | Ridge vent, box vents, turbines or powered fans | What is being replaced or added, and why |
| Flashing | Metal at walls, chimneys and valleys | New or reused, and step flashing details |
| Pipe boots | Seals around plumbing vents | New boots on every pipe |
| Permit | City permit and inspection | Included or extra |
| Cleanup | Debris removal and magnetic nail sweep | Included, and how many sweeps |
Two of those lines cause most disputes later. Decking is the first. Nobody can see the deck until the old roof is off, so the estimate should state a price per sheet. Fixr lists decking replacement at $2 to $8 per square foot of the affected area, so a few soft spots can add up quickly. Flashing is the second. Reusing old flashing can save money, but on a roof with leaks around a chimney or wall, it is often the reason the leak started. Our guide on underlayment, ventilation and decking explains why these layers matter in North Texas heat.
What about permits and code items?
Several DFW cities require a permit to replace a roof. The Town of Addison, for example, states that a permit is required for a re-roof shingle replacement. Rules vary by city, so ask your roofer whether your city requires one and whether it is included in the price.
Code-related items such as drip edge, proper starter and ventilation are often what separates a complete estimate from a cheap one. If one bid is much lower, check whether these items are simply missing. When in doubt, ask the roofer to put in writing which items are included and which are not.
How do I compare two roofing quotes fairly?
Follow these steps before you decide which bid is "cheaper":
- Match the squares. Write the measured and ordered squares from each estimate side by side.
- Match the shingle. Same brand and product line, or note the difference. A three-tab, an architectural shingle and an impact-resistant shingle are not the same product.
- Match the tear-off. Same number of layers and same disposal terms.
- Match the decking price. Compare the per-sheet price, not just whether decking is mentioned.
- Check the edges and penetrations. Drip edge, starter, ridge cap, flashing, pipe boots and vents on each.
- Check the extras. Permit, gutters, skylights, satellite dish reset, cleanup.
- Compare payment terms. Deposit, when payments are due and what triggers the final payment.
- Only then compare totals.
If you want a range to compare against, our roof cost calculator gives a planning figure based on your squares and material, and what a new roof costs in Dallas–Fort Worth explains what moves the price.
What payment terms are normal?
The Texas Department of Insurance gives three simple rules: never sign a contract with blanks on it, don't pay in full up front, and don't make the final payment until the job is done. A reasonable estimate or contract spells out:
- The deposit amount, if any, and what it covers (often materials)
- When the balance is due
- How change orders are approved and priced
- What happens if weather delays the job
Be wary of anyone who wants full payment before materials arrive, or who asks you to sign over your insurance check before work starts.
What changes when insurance is paying for the roof?
If your roof was damaged by hail or wind and insurance is paying, two Texas laws affect what your estimate and contract should say.
The deductible. Texas Insurance Code §707.002 says a person insured under a property policy shall pay any deductible on a claim. Business & Commerce Code §27.02 makes it a Class B misdemeanor for a contractor to waive, absorb or rebate your deductible, and requires contracts of $1,000 or more that are expected to be paid by insurance to include a bold notice of at least 12-point type stating that Texas law requires you to pay the deductible. If an estimate says "deductible covered" or shows a mysterious discount equal to your deductible, that is a problem for both of you. Read more in our guide on why no roofer can legally waive your deductible.
The roofer's role. Under Texas Insurance Code §4102.163, a contractor may not act as a public adjuster on a property where it provides roofing services, or advertise that it will adjust claims. An estimate or contract that promises the roofer will deal with your insurer on your behalf, or bargain over your settlement, is a warning sign. What a roofer can do is inspect, document, meet the adjuster to show the damage, write an estimate and do the work.
You will also see the insurer's estimate, which often uses similar line items. Comparing it with your roofer's estimate line by line is the best way to spot missing items. If the insurer withheld depreciation, our guide to ACV vs. RCV and the second insurance check explains how that money is released. Our insurance claim help page shows how we document storm damage.
What should an estimate say about warranties?
There are usually two kinds: the shingle manufacturer's warranty and the roofer's workmanship warranty. They cover different things, and they are not interchangeable. Ask each bidder to state in writing:
- Which manufacturer warranty applies and whether it needs to be registered
- The length and terms of the workmanship warranty
- What would void either one
- Who you call if a leak appears
Our guide on manufacturer vs. workmanship roof warranties explains the difference, and 25 questions to ask a roofer before you sign gives you a full list to bring to each meeting.
What does a Verde Roofing estimate look like?
Every Verde Roofing price is a written estimate after a free inspection. Chris inspects the roof with you, documents what he finds with photos and explains whether a repair or a full roof replacement makes more sense before you spend anything. We install Malarkey and Owens Corning shingles, and we are happy to walk you through any other estimate you have, line by line, so you can compare them fairly.
Want a second set of eyes on your quote?
Call or text (214) 687-1951, 24/7, or book a free roof inspection. We will inspect the roof, give you an itemized written estimate and explain every line, including the ones another bid might be missing.
Questions people ask next
Should a roofing estimate be free?
Many roofers in North Texas inspect and estimate for free, including Verde Roofing. A paid inspection can make sense for a detailed report, such as for a home sale or a commercial building. Either way, ask up front whether there is a charge and whether the estimate is a firm price or subject to change after tear-off.
How long is a roofing estimate good for?
It depends on the company. Material prices change, so many estimates state an expiration date or say the price holds for a set number of days. If yours has no date, ask how long the price is valid and get the answer in writing before you schedule the work.
Is the insurance company’s estimate the same as my roofer’s estimate?
No. The insurer’s estimate shows what the company agrees to pay for the covered damage. Your roofer’s estimate shows what the roofer will charge to do the work. They often use similar line items, but quantities, prices and included items can differ. Compare them line by line and ask questions about every gap.
What if the roofer finds rotten decking after tearing off the roof?
That is why the estimate should list a per-sheet price for decking replacement and say how you will be told. A good roofer photographs the damaged sheets and tells you the count before closing up. Without a set price, you have no way to judge the change order.
Is it a red flag if a roofer will not itemize the estimate?
It is a reason for caution. A single lump-sum price makes it impossible to compare bids or know what is included. You do not need every nail listed, but you should see squares, shingle line, tear-off, underlayment, edge metal, vents, flashing, decking price, permit and payment terms.
Sources
Keep reading
Related guides
Cost & financingWhat Is a Roofing Square? How Roofers Measure and Price Your RoofA roofing square is 100 square feet of roof surface. Roofers measure every roof plane, multiply length by width, add the planes together, adjust for pitch…Read the guide
Hiring a rooferRoofing Contract Red Flags and Your Rights Under Texas LawA Texas roofing contract should name the exact scope, materials, price, payment schedule, start window and warranties in writing. If insurance will pay and the price…Read the guide
Hiring a roofer25 Questions to Ask a Roofer Before You SignBefore hiring a roofer, ask where the company is based, how it is insured, who pulls the permit, who does the work, exactly which materials and…Read the guide 

