Call or text 24/7 · 24-hour emergency service Plano, TX 5.0 · 54 Google reviews
Verde Roofing & Construction

Roofing

Metal Roofing in Plano & Dallas–Fort Worth

A metal roof is a long-term decision. We help you weigh it honestly against shingles for your house, your budget and how long you plan to stay, then install it with care.

(214) 687-1951
  • 5.0 ★54 Google reviews
  • 24/7Call or text
  • FreeInspection & estimate
Standing seam metal roof panels installed by Verde Roofing

The short answer

Verde Roofing, based in Plano, installs and repairs residential metal roofs across Dallas–Fort Worth. Owner Chris Grimes inspects your current roof, explains how metal compares with laminated shingles for your home and plans, and gives you a written estimate after a free inspection. If hail has dented an existing metal roof, he documents the damage with photos and meets your adjuster on site. Call or text (214) 687-1951.

What is included

Free inspection and consultation

Chris looks at your current roof and talks through whether metal fits your home and goals.

Honest comparison with shingles

You see the trade-offs in cost, looks, noise, hail and resale before you decide.

Written estimate

A written scope covering tear-off, decking, underlayment, panels, trim and flashing.

Tear-off and decking check

The old roof comes off so the decking can be inspected and repaired where needed.

Underlayment and flashing

The layers beneath the metal and the trim at edges, valleys and walls are installed carefully.

Metal roof repair

Loose fasteners, leaking seams, trim and flashing problems on existing metal roofs are repaired.

Hail damage documentation

Dents and functional damage are photographed, and Chris meets your adjuster on site.

Who a metal roof is for

Metal makes the most sense for homeowners who plan to stay in their house a long time, who like the look of standing seam or metal panels, or who own rural property where metal already fits the setting, such as acreage homes and outbuildings in the outer DFW counties. It is less of a fit if you expect to sell soon, are in a neighborhood where the HOA restricts roof materials, or need the lowest up-front price.

Verde Roofing, based in Plano, installs and repairs metal roofs as part of our residential roofing work. Owner Chris Grimes will give you a straight answer on whether metal is right for your home or whether laminated shingles from Malarkey or Owens Corning are the better buy. Our honest metal roof vs. shingles guide is a good place to start.

Metal vs. shingles at a glance

QuestionMetalLaminated shingles
Up-front costHigherLower
LookModern, farmhouse, ruralTraditional; many colors
HailCan dent; check policy for cosmetic exclusionsCan bruise or crack
RepairsPanels and trim specific to the systemWidely available
HOA approvalNot always allowedUsually allowed

Common types of residential metal roofs

  • Standing seam. Long panels joined by raised seams, with fasteners hidden under the seams. Clean modern look; usually the higher-priced option.
  • Stone-coated steel. Steel panels coated with granules and shaped to look like shingles, shakes or tile. A choice for owners who want metal without the metal look.
  • Exposed-fastener panels. Corrugated or ribbed panels screwed through the face. Common on barns, shops and rural homes; the screws and their washers need checking over time.

Each type has its own trim, flashing details and installation rules, so ask which one an estimate is for when you compare bids.

What moves the price

Metal roof prices depend on the panel type (standing seam, stone-coated steel or exposed-fastener panels), the roof's size, pitch and complexity, the amount of trim and flashing, tear-off and decking repair. Verde's price is always a written estimate after a free inspection. Our guide to metal roof cost in Texas explains published ranges and whether the extra cost pays back, and the roof cost calculator gives a quick ballpark before the inspection.

How the free inspection works

Chris inspects your current roof and decking signs, asks how long you plan to stay and what matters most to you, and explains the options. If metal fits, you get a written estimate listing the panel type, underlayment, trim and scope. If it does not, he will tell you, and you can compare a roof replacement with shingles instead.

Installation

Our estimates are written for a full tear-off. That lets the crew inspect the decking, replace damaged boards, install new underlayment and set trim and flashing properly at eaves, valleys, walls and penetrations. These details decide whether a metal roof stays dry; the panels themselves are only part of the job. Ask any installer for the manufacturer warranty and the workmanship warranty in writing, and read our guide to roof warranties.

Metal roof repair and hail

Existing metal roofs need occasional repair: fasteners that back out as the metal expands and contracts in the Texas heat, sealant at seams and trim, and flashing around vents. Hail can dent panels, and whether that is covered depends on your policy. Some policies exclude cosmetic damage to metal roofs. Our guide to hail dents on a metal roof explains cosmetic versus functional damage.

If storm damage is involved, Verde documents it with photos, meets your adjuster on site to show what we found and writes the repair estimate. You own the claim; we do not negotiate it. See storm and hail damage and insurance claim help.

Insurance and resale

Whether a metal roof changes your premium or your home's value depends on your insurer and your market. Read does a new roof add home value or lower your insurance and ask your agent in writing before you decide.

Where we work

From Plano we install and repair metal roofs in Collin, Dallas, Denton, Tarrant, Rockwall, Ellis, Hunt, Kaufman, Johnson, Parker and Wise counties. See our service areas.

Talk through metal for your home

Call or text (214) 687-1951, 24/7, or book a free inspection. Chris will look at your roof and give you an honest recommendation and a written estimate.

How it works

From first call to finished job

  1. 01

    Free inspection

    Chris inspects your roof and talks through metal versus shingles for your home.

  2. 02

    Written estimate

    You get a written estimate with the panel type, trim, underlayment and scope.

  3. 03

    Installation

    The crew removes the old roof, checks the decking and installs the metal system.

  4. 04

    Final walk-through

    We walk the finished roof with you and clean the site.

FAQ

Metal Roofing questions

Is a metal roof worth it in North Texas?

It can be, mainly for owners who plan to stay a long time and like the look. Metal usually costs more up front than laminated shingles, and the payoff depends on how long you keep the house, hail, insurance terms and your neighborhood. Our metal roof vs. shingles guide lays out the honest pros and cons.

How much does a metal roof cost compared with shingles?

Metal generally costs more than architectural shingles, and the gap depends on the panel type, such as standing seam, stone-coated steel or exposed-fastener panels, plus roof complexity, pitch, tear-off and trim. Verde gives a written estimate after a free inspection. Our Texas metal roof cost guide explains the published ranges and what drives them.

Does hail damage a metal roof?

Large hail can dent metal panels. Whether dents matter depends on whether they are cosmetic or affect how the roof sheds water, such as cracked coatings, opened seams or damaged fasteners. Some policies exclude cosmetic damage to metal roofs, so read yours. Chris photographs the damage and can meet your adjuster on site.

Is a metal roof louder in the rain?

Over solid decking with underlayment and an insulated attic, most homeowners find rain noise similar to a shingle roof. Metal installed over open framing, as on some barns, is louder. Ask how the roof will be installed over your decking and what underlayment will be used when you compare estimates.

Can a metal roof be installed over my existing shingles?

Some systems allow it, but it hides the condition of the decking and adds weight, and local rules and manufacturer instructions vary. Verde's estimates are written with a full tear-off so the decking can be inspected and repaired. If you are offered an overlay, ask what happens to the decking and how it affects warranties.

Does a metal roof lower my homeowners insurance in Texas?

It might. Some Texas insurers offer discounts for roofs rated for impact resistance, and some policies treat metal roof hail damage differently. Ask your agent before you choose, and get the answer in writing: which roof ratings earn a discount, and whether cosmetic hail damage to metal is covered under your policy.

CallText