How Much Does a New Roof Cost in Dallas–Fort Worth?

In short
National cost guides put a full asphalt shingle replacement at roughly $3.75 to $11 per square foot of roof (Fixr, 2026), which works out to about $7,500 to $22,000 for a typical 20-square roof. Your price depends mostly on roof size in squares, pitch, number of old layers, rotten decking, shingle line and code items. The only reliable number is a written, itemized estimate after an inspection.
Key takeaways
- Published 2026 guides put asphalt shingle replacement at about $3.44 to $12 per square foot installed, depending on the guide and the shingle.
- Roofers price by the square (100 square feet of roof surface), so the measured squares on your estimate drive the total more than anything else.
- Pitch, extra layers, rotten decking, two-story access and shingle grade can each move the price by thousands of dollars.
- Labor is about 60 percent of a roof's cost according to This Old House, so a quote far below others usually cuts labor, materials or code items.
- If hail or wind caused the damage, your insurance policy may pay most of the cost minus your deductible, which Texas law says you must pay.
You are probably here for one of two reasons. A spring storm rolled through Collin County and now there are shingle pieces in the yard, or your roof is old enough that every heavy rain makes you look at the ceiling. Either way, you want a number before you call anyone.
This guide gives you the honest version: what published national cost guides say a new roof costs, why those numbers differ so much, and the specific things on a North Texas house that push your price up or down. It will not give you a fake "DFW average," because nobody publishes a verified one.
What does a new roof cost in Dallas–Fort Worth?
There is no official Dallas–Fort Worth roof price. What exists are national cost guides that collect contractor and homeowner data. Here is what three of them publish for a full replacement:
| Source | What it measures | Published figure |
|---|---|---|
| Fixr (updated February 2026) | Full replacement, all materials | $3.75 to $11 per sq ft of roof, average $4.75; about $10,000 average job |
| Fixr (2026) | Asphalt shingles, about 2,000 sq ft of roof | $6,000 to $10,000 |
| This Old House (updated March 2026) | Asphalt shingles installed | $3.44 to $12 per sq ft |
| This Old House (2026) | Architectural shingles, 2,000 sq ft home | $11,914 to $16,436 |
| JLC Cost vs. Value 2025 | National asphalt shingle roofing project | $31,871 average job cost |
Those ranges are wide for a reason. Fixr's and This Old House's figures assume a fairly simple roof with builder-grade materials and modest pitch. The Cost vs. Value number from the Journal of Light Construction is a single national project average that reflects a larger, fully specified job. A two-story house in Frisco with a steep, cut-up roof will land in a very different place than a one-story ranch in Richardson.
If you want to work the math for your own house, our roof cost calculator lets you plug in your size, pitch and material and see a range. Treat it as a planning number, not a quote.
How do roofers price a roof?
Roofers do not price by the square footage of your house. They price by the square, which is 100 square feet of roof surface. Owens Corning's measuring guide uses that same definition, and it is the unit you will see on every estimate.
A 2,000-square-foot house does not have a 2,000-square-foot roof. Overhangs, porches, garages and slope all add surface. This Old House notes that a typical roof uses a pitch multiplier of about 1.12 to estimate roof area from the home's footprint, and Owens Corning's guide lists a slope factor of 1.118 for a 6-in-12 roof and 1.414 for a 12-in-12 roof. Then a waste allowance gets added on top, which Owens Corning puts at 10 to 15 percent for shingles.
Converting the per-square-foot ranges above to per-square prices is simple multiplication: Fixr's $3.75 to $11 per square foot equals $375 to $1,100 per square installed. On a 20-square roof, that is roughly $7,500 to $22,000. Our guide on what a roofing square is and how to check yours walks through the measuring step by step.
What makes a roof cost more or less in North Texas?
Once the squares are set, these are the items that move a DFW price the most:
- Roof size in squares. The biggest driver. Every added square adds materials, labor and disposal.
- Pitch. A steep roof needs harnesses, roof jacks and slower work. Fixr notes steep roofs need added safety measures that raise labor costs.
- Number of old layers. Fixr puts tear-off and disposal at about $50 per square, rising to as much as $150 per square for heavy materials or multiple asphalt layers.
- Decking condition. Rotten or delaminated plywood has to be replaced before new shingles go on. Fixr lists decking replacement at $2 to $8 per square foot of the affected area.
- Shingle line. Three-tab, architectural and impact-resistant shingles are priced very differently. See Class 4 impact-resistant shingles for Texas hail before you choose.
- Complexity. Valleys, hips, dormers, skylights, chimneys and many roof planes mean more cutting, more flashing and more waste.
- Access and height. Two- and three-story homes, tight lots and landscaping you need protected all take time.
- Ventilation and code items. New pipe boots, vents, drip edge and starter strips are usually included in a proper replacement and sometimes missing from a cheap one.
- Permits. Fixr lists permit fees at $100 to $500. Several DFW cities require a permit for a reroof; the Town of Addison, for example, states that a permit is required for a re-roof shingle replacement.
This Old House estimates labor at about 60 percent of total project cost. That is why the cheapest bid usually saves money in one of three places: fewer workers, cheaper materials or skipped code items.
How much more do metal, tile and other materials cost?
Asphalt shingles are the most common roof in North Texas and the least expensive to install. Other materials carry real price premiums. Fixr's 2026 figures for about 2,000 square feet of roofing show:
| Material | Fixr installed range |
|---|---|
| Asphalt shingles | $6,000 to $10,000 |
| Architectural shingles | $8,000 to $32,000 |
| Metal | $14,000 to $38,000 |
| Concrete tile | $14,000 to $24,000 |
| Clay tile | $14,000 to $28,000 |
| Slate | $20,000 to $60,000 |
Heavy materials such as tile and slate also need a roof structure rated for the weight, which can add engineering and framing costs. If you are weighing steel, read our breakdown of metal roof cost in Texas, which covers standing seam versus exposed-fastener panels.
Does insurance pay for a new roof after hail in DFW?
If hail or wind damaged your roof, your homeowners policy may pay for the repair or replacement, minus your deductible. That is the most common way North Texas homeowners pay for a new roof. The Texas Department of Insurance is also clear about the limit: your insurer won't pay for a new roof just because it is old or worn out.
Two things decide how much you receive. First, whether your policy pays replacement cost or actual cash value on the roof; TDI notes that some companies switch older roofs to actual cash value at renewal. Second, your wind and hail deductible, which TDI says is often higher than the deductible for other damage.
Texas law requires you to pay that deductible. Under Business & Commerce Code §27.02, a contractor who offers to waive, absorb or rebate it commits a Class B misdemeanor, and roofing contracts of $1,000 or more expected to be paid by insurance must include a bold notice saying so. Our guide to why no roofer can legally waive your deductible explains the details, and how a roof insurance claim works in Texas covers the full process.
When we inspect a storm-damaged roof, Chris documents the damage with photos, meets your adjuster on site to show what he found, and writes the repair estimate. You own the claim; we do the inspection, the documentation and the work. More on that on our storm and hail damage page.
What if you are paying for the roof yourself?
An aging roof with no storm damage is an out-of-pocket project. That changes the math: you may want to compare a repair that buys a few more years against a full replacement, and you will want to know your financing options before you sign.
Here is a short checklist for budgeting without insurance:
- Get the number of squares and the shingle line in writing from every bidder.
- Ask for a decking allowance per sheet so a surprise does not blow up the price.
- Ask whether the quote includes permit, disposal, drip edge, new pipe boots and ventilation.
- Decide whether impact-resistant shingles are worth the premium given possible insurance discounts.
- Compare savings, a home equity line and other loans before agreeing to contractor financing.
Our guide on how to pay for a new roof covers savings, insurance, loans and timing in detail. If you are thinking about selling soon, whether a new roof adds home value or lowers your premium is worth a read too.
How do you get an accurate price for your roof?
A cost guide gives you a range. Only a person on your roof can give you a price. A good inspection should end with a written, itemized estimate that lists:
- Measured squares and the waste factor used
- The exact shingle brand and product line
- Tear-off of how many layers, and disposal
- Underlayment type, drip edge, starter, ridge cap and vents
- A per-sheet price for any decking replacement
- Permit and inspection, if your city requires one
- Payment schedule and what happens if hidden damage is found
Get at least two estimates, line them up item by item and ask questions about every difference. Our guide on how to read a roofing estimate line by line shows what to look for.
At Verde Roofing, the price for your roof replacement is always a written estimate after a free inspection. We install Malarkey and Owens Corning shingles, and Chris will explain whether you need a repair or a full replacement before you spend anything. You can read about who we are and what homeowners say in our reviews.
Ready for a real number on your roof?
Call or text (214) 687-1951, 24/7, or book a free roof inspection. Chris will walk the roof with you, photograph what he finds, and give you a written estimate you can compare against any other bid.
Questions people ask next
Is it cheaper to replace a roof in winter in Texas?
Sometimes. Roofers in North Texas are busiest after spring hail, so scheduling can be easier from late fall through winter. Material prices do not usually drop by season, though, and a mild dry week is needed for shingles to seal. Ask for a written estimate and a start window rather than waiting for a seasonal discount that may not come.
How long does a full roof replacement take on a DFW house?
Most single-family shingle roofs are torn off and replaced in one to two working days once materials are delivered. Larger, steeper or more complex roofs, extra layers, decking replacement and weather can stretch that. Permit inspections in some cities add a short wait before or after the work.
Can I put new shingles over my old roof to save money?
Whether a recover is allowed at all depends on your local code and the existing roof, and many roofers prefer a full tear-off. Laying over hides decking damage, adds weight, can shorten shingle life and may affect the manufacturer warranty. Ask the roofer to explain in writing why a recover is or is not appropriate for your roof.
Does insurance pay for a new roof just because it is old?
No. The Texas Department of Insurance says your insurance company won't pay for a new roof just because it is old or worn out. Coverage applies to sudden damage such as hail, wind or a falling tree. An older roof may also be paid at actual cash value instead of replacement cost, depending on your policy.
Why are roof replacement quotes in Dallas so different from each other?
Quotes differ because roofers measure differently, include different items and use different shingle lines. One quote may leave out decking, drip edge, permits or new vents that another includes. Line the quotes up item by item, confirm the number of squares on each, and ask what every price includes before you compare totals.
Sources
Keep reading
Related guides
Cost & financingWhat Is a Roofing Square? How Roofers Measure and Price Your RoofA roofing square is 100 square feet of roof surface. Roofers measure every roof plane, multiply length by width, add the planes together, adjust for pitch…Read the guide
Cost & financingHow to Read a Roofing Estimate Line by LineA complete roofing estimate lists the company’s full contact details, the measured squares and waste factor, how many layers come off, the exact shingle line, underlayment…Read the guide
Cost & financingHow to Pay for a New Roof: Insurance, Savings, Financing and TimingIf a storm damaged your roof, start with your homeowners policy. If insurance won’t cover it, the main options are savings, a Texas home equity loan…Read the guide 

