Commercial Roof Replacement Cost: What Building Owners Should Budget

In short
National cost guides put a TPO flat roof at roughly $4 to $14 per square foot installed, with HomeGuide citing $5 to $12 once tear-off, insulation and labor are added up. What moves a commercial price most is roof size, tear-off and wet insulation, insulation thickness, deck repairs, penetrations and rooftop units, edge and flashing details, access and the warranty. The only real number is a written bid after an inspection.
Key takeaways
- HomeAdvisor’s 2026 flat roof guide lists TPO at $4–$14 per square foot, EPDM at $5–$13 and modified bitumen at $4–$8.
- HomeGuide breaks TPO into removal ($1–$2), membrane ($1–$2.50), insulation ($0.50–$3) and labor ($2.50–$4.50) per square foot, for $5–$12 total.
- Wet insulation and deck damage are the biggest surprise costs, so a moisture survey before bidding protects your budget.
- Penetrations, curbs, parapets and edge metal often add more than the membrane choice.
- Compare bids on identical scope: membrane thickness, insulation R-value, attachment, details and warranty.
The roof on your building is leaking in three places, the patch bills keep coming, and someone has finally said the word “replacement.” Before you get a single bid, you want to know what kind of number to expect, so you can talk to ownership, your lender or your board without guessing.
This guide gives the published national ranges for commercial flat roof replacement, explains what actually drives the price on a building in Dallas–Fort Worth, and shows how to compare bids so you are not surprised halfway through the job. Verde installs TPO systems on offices, convenience stores, warehouses and multi-family buildings, so TPO is the focus here.
What does a commercial roof replacement cost per square foot?
National cost guides give useful starting points. They are typical published ranges, not quotes, and they skew toward smaller flat-roof projects, so use them to frame a budget, not to set one.
| System | HomeAdvisor 2026 (per sq ft) | HomeGuide (per sq ft installed) |
|---|---|---|
| TPO | $4–$14, average about $8.75 | $4–$10 |
| EPDM (rubber) | $5–$13 | $3.50–$10 |
| PVC | not broken out | $5–$12 |
| Modified bitumen | $4–$8 | $4–$7.50 |
| Built-up (tar and gravel) | $4–$10 | not listed |
HomeAdvisor’s overall flat roof range runs from $4 to $35 per square foot, with green (vegetated) roofs at the top. It lists labor at about $3 to $7 per square foot, or roughly 20 to 30 percent of the total, and old roof removal at $1 to $5 per square foot.
Large commercial roofs can benefit from scale, because setup, mobilization and equipment are spread over more square feet. They can also cost more per foot when they involve cranes, tall parapets, heavy rooftop equipment, after-hours work or strict code requirements. Our comparison of TPO vs. other flat roof systems covers how the membranes differ beyond price.
What goes into the price of a TPO roof?
HomeGuide breaks a TPO installation into its main parts, which is a helpful way to read any bid:
| Component | HomeGuide range per sq ft |
|---|---|
| Old roof removal | $1.00–$2.00 |
| Membrane materials | $1.00–$2.50 |
| Insulation | $0.50–$3.00 |
| Labor | $2.50–$4.50 |
| Total installed | $5.00–$12.00 |
The membrane itself is a smaller share than most owners assume. HomeGuide lists TPO membrane systems at $1.80 to $3.50 per square foot for materials alone, depending on thickness and whether the system is ballasted, mechanically fastened or fully adhered, with adhered systems at the top of that range. Insulation thickness moves the price nearly as much; HomeGuide’s polyiso figures run from $0.50–$1.50 per square foot for 1-inch boards to $1.30–$3.00 for 3-inch boards.
HomeGuide also lists flashing at $50 to $500 depending on complexity and penetrations such as drains, curbs and skylights at $200 to $500 each. On a building covered with rooftop units, those line items add up quickly.
What drives the cost up or down on your building?
Every commercial roof is a custom job. These are the factors that matter most, roughly in order of how often they surprise owners:
- What is under the old roof. Wet insulation must come out. If a moisture survey finds large wet areas, a recover becomes a tear-off, and the budget changes.
- Deck condition. Rusted steel deck or rotted wood deck must be repaired before new insulation goes down. Ask for unit prices in the bid.
- Number of layers. Multiple old roofs mean more tear-off and disposal.
- Insulation and code. Thicker insulation costs more upfront. Your city’s building and energy code may set requirements when a roof is replaced, so ask your roofer what applies to your building.
- Drainage fixes. Tapered insulation to eliminate ponding adds material but extends roof life.
- Penetrations and rooftop units. Each curb, pipe, vent and drain needs proper flashing. Units may need to be lifted or disconnected by an HVAC contractor.
- Parapets and edge metal. Tall parapet walls and new coping or edge metal add labor and material.
- Access and logistics. Crane time, limited staging space at a convenience store, tenant traffic at an office, and safety setup on a tall multi-family building all cost money.
- Membrane thickness and attachment. Thicker membrane and fully adhered systems cost more.
- Warranty type. A manufacturer system warranty with inspection requirements typically costs more than a material-only warranty.
When I walk a commercial roof for a bid, I spend more time on the drains, curbs and edges than on the open field of membrane. The open field is easy to price. The details are where bids diverge.
How does the type of building change the cost?
The same membrane costs different amounts on different buildings, because the work around it changes. Here is how the four building types we roof most often tend to differ.
Offices. Tenants are in the building during the day, so noise, odors and roof access through the building all need planning. Some work may need to happen early or in phases. Office roofs often carry several rooftop units and a lot of penetrations for exhaust and plumbing vents, each of which needs flashing.
Convenience stores. The roof area is small, but the site is busy from early morning to late night. Staging space is tight, the parking lot cannot be closed, and the store usually has refrigeration equipment, signage and canopy connections on or near the roof. Mobilization costs are spread over fewer square feet, so the per-foot price can run higher than on a big roof.
Warehouses. Large, open roofs benefit from scale, and the field of membrane goes down efficiently. The cost questions tend to be deck condition (steel deck rust is common on older buildings), drainage across long runs, skylights, and whether the insulation is dry across the whole area.
Multi-family buildings. Residents live under the roof around the clock. Daily dry-in, debris control near walkways and parking, resident notices and multiple buildings in phases all add coordination. Boards and property managers usually need a clear schedule and written scope for approvals.
How should you budget for a commercial roof replacement?
A reasonable budgeting process looks like this:
- Get an inspection and moisture assessment. Core cuts or a moisture survey show whether insulation is dry. This one step prevents the biggest change orders.
- Set a planning range. Multiply your roof area by a published range as a rough frame. For illustration only, HomeGuide’s $5–$12 TPO range on a 20,000 square foot warehouse roof works out to about $100,000–$240,000. Your bid may land inside or outside that range.
- Add a contingency for deck repairs and hidden conditions.
- Decide what you need from the roof. Long hold periods justify thicker membrane and more insulation.
- Plan timing. Spring storm season in North Texas and summer heat both affect scheduling. Ask about phasing to keep the building dry and tenants informed.
- Check insurance first. If the roof has storm damage, have it documented before replacement, because a covered loss changes the math. See hail damage on a commercial roof.
If the roof is not yet failing, a well-chosen coating might push replacement out a few years. Our guide to roof coating vs. replacement covers when that is a smart move and when it wastes money.
Does insurance cover a commercial roof replacement?
Insurance pays for covered damage, such as hail or wind, not for age and wear. How much it pays depends on your policy.
Two policy terms often matter most:
- Percentage deductibles. Some property policies set the wind and hail deductible as a percentage of the insured value rather than a flat dollar amount. The Texas Office of Public Insurance Counsel explains, for residential policies, that the percentage is calculated on the coverage amount, not the claim, so a 3 percent deductible on $200,000 of coverage is $6,000. Commercial policies that use percentage deductibles work the same way, and on a building insured for millions the dollar figure gets large. Check your declarations page.
- Actual cash value vs. replacement cost. Older roofs are sometimes covered at actual cash value, which subtracts depreciation. Our guide to ACV vs. RCV and depreciation explains the difference.
Texas law requires the insured to pay the deductible, and a contractor may not waive or absorb it. Verde inspects, documents damage with photos, meets the adjuster on site to show what was found, and writes the repair estimate. The owner keeps control of the claim.
How do you compare commercial roofing bids?
Bids that look far apart often describe different roofs. Line them up on identical terms:
- Membrane type and thickness (45 mil vs. 60 mil is not a small difference)
- Attachment method: mechanically fastened, adhered or ballasted
- Insulation type and total thickness, plus any cover board
- Tapered insulation and drain work
- Flashing details at curbs, parapets, penetrations and edges
- How rooftop units are handled, and who coordinates with HVAC
- Unit prices for deck repair and wet insulation replacement
- Permits, disposal, cleanup and site protection
- Schedule and phasing
- Warranty type, length and what maintenance it requires
- Proof of liability and workers’ compensation insurance
Ask each bidder to explain anything that differs. A low bid that leaves out tapered insulation or uses thinner membrane is not cheaper; it is a different roof. For buildings managed by a board or property company, our guide to HOA and multi-family roofing covers approval steps and resident communication. Once the new roof is on, a regular inspection and maintenance program protects the investment.
How do you protect the investment after replacement?
A new roof is a capital asset with a maintenance schedule. Keep the warranty, as-built details, and inspection records together. Schedule inspections in spring and fall and after significant storms, keep drains clear, and make sure HVAC and other trades walk on pads and report damage. Our maintenance plans page explains the maintenance options we offer.
Want a written number for your building?
Verde installs TPO roofing on offices, convenience stores, warehouses and multi-family buildings across Dallas–Fort Worth. Learn more about our commercial roofing service. The only price that counts is a written estimate after a free inspection: call or text (214) 687-1951, 24/7, or book a free roof inspection.
Questions people ask next
How much does it cost to replace a 10,000 square foot commercial roof?
Using HomeGuide’s published TPO range of $5 to $12 per square foot including removal, insulation and labor, a 10,000 square foot roof would land somewhere around $50,000 to $120,000. Treat that as a planning range only. Your actual price depends on what is under the existing roof, details, access and code requirements, and comes from a written bid.
Is it cheaper to recover a commercial roof than tear it off?
Usually, if a recover is allowed. HomeGuide lists TPO removal at $1 to $2 per square foot and HomeAdvisor lists removal at $1 to $5. A recover skips that, but only works when the existing insulation is dry and code allows another layer. Wet insulation must come out or it damages the new roof.
Does insurance pay for a commercial roof replacement?
Insurance pays for covered damage, such as hail or wind, subject to your deductible and policy terms; it does not pay for age or wear. Many commercial policies use percentage wind and hail deductibles or actual cash value settlement on older roofs, so read your declarations page before a storm.
How long does a commercial roof replacement take?
It depends on size, tear-off, weather and how much the building must stay in use. A small convenience store roof may take days, a large warehouse or multi-family complex weeks. Ask the roofer for a phased schedule that keeps the building dry each night and tells tenants when noisy work will happen.
What should a commercial roofing bid include?
Membrane type and thickness, attachment method, insulation type and thickness, cover board, tapered insulation, flashing and edge metal details, how rooftop units and penetrations are handled, deck repair unit prices, permits, cleanup, schedule, warranty type and length, and proof of insurance. Anything missing is a likely change order later.
Sources
Keep reading
Related guides
Commercial roofingTPO vs. Modified Bitumen, PVC and EPDM: Choosing a Flat RoofTPO is a white, heat-welded single-ply membrane that sits in the middle on price and is popular in Texas because it reflects sun. PVC costs more…Read the guide
Commercial roofingRoof Coating vs. Replacement for Flat Commercial RoofsA coating can extend a flat commercial roof only when the existing membrane is still sound, the insulation underneath is dry and the roof drains. The…Read the guide
Commercial roofingHail Damage on a Commercial Roof: Inspection and the Insurance ClaimAfter hail, get the roof inspected quickly, protect the building from further water, and document everything with dated photos. Read your policy for the claim deadline…Read the guide 

